Sharp UX-D50 - Manual (Page 43)

Storing and Using Auto-Dial Numbers
41
2. Cordles
s
Hands
et
Dialing an auto-dial number
1
Press once.
2
Press or until the auto-dial number that you wish to dial
appears in the display (the name will appear, or the number if no name
was stored).
•
To go directly to names that begin with a certain letter, hold down the
number key with that letter until the letter appears in the display, and then
press until the desired name appears.
•
To check the number of a name in the display, press .
•
If you wish to dial an auto-dial number that is stored in the fax machine,
press until BASE appears in the display, press , and then press
or until the desired number appears. (Note that an auto-dial
number in the fax machine that includes an “R” will not appear.)
3
Press .
•
The number is automatically dialed.
all.book Page 41 Monday, September 1, 2003 3:46 PM