Sharp UX-D50 - Manual (Page 75)

Transfer Function
73
3. Ans
w
er
ing
Machi
n
e
4
Press and speak into the handset to record the message.
•
The transfer message can be up to 15 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press .
START/SPEICHER
STOP
Checking or erasing the transfer message
To check or erase the transfer message, follow Steps 1 and 2 of the above
procedure, and then press to check the message, or to
erase the message.
IEDERG./
ALTEN
LÖSCHEN
Turning the Transfer function on and off
When you go out and wish to use the Transfer function, turn it on as follows:
1
Press once and once.
2
Press once and 3 times.
3
Press .
4
Press to turn on the Transfer
function.
(Press to turn the function off.)
5
Press to return to the date and time display.
FUNKTION
1
2
STOP
TRANSFER FUNC
Display:
A.M. SETTING
1=YES, 2=NO
The display briefly shows
your selection, then:
ON A.M. FAILURE
all.book Page 73 Monday, September 1, 2003 3:46 PM