Sagem 4450E - Manual (Page 118)

SAGEM 3P@C
3P@C Installation Manual
Page 7-3 Reproduction and communication in any form prohibited without the written permission of SAGEM SA
Table 7-1 Bootrom command
Seria
l No. Item Description
1 ? List all available commands
2 h List all available commands
3 g Exit from the menu, and continue the system load
process. That is, implement the system boot file in the
current system.
4 dl Enter the download mode to download the configuration
file of system file
5 r Reboot the system
Step 3: Enter the upgrade submenu
After entering the Bootrom main menu, select the fourth option: dl to enter the sub-menu as follows:
you enter download mode
? - List all available commands
h - List all available commands
n - Exchange load mode(default FTP)
p - Print boot parameters
c - Change boot parameters
a - Download system image to Flash
A - Download system image and boot
s - Download system base config information
fa - Download ADU fpga code
fv - Download VDU fpga code
da - Download ADU chip code
dv - Download VDU chip code
load <filename> - Download file to Flash
del <filename> - Delete a file in Flash
rename <oldname> <newname> - Rename a file in Flash
erase fileinfo - Erase files in Flash, all files will be lost!
show flash - Show Flash file info
x - Quit
Table 7-2 Upgrade submenu in the network port
Serial
No. Item Description
1 ? List all available commands
2 h List all available commands
3 n Change the download mode, use Xmode or FTP (default)
mode
4 P Print the current download configuration parameters