Sagem 4450E - Manual (Page 123)

SAGEM 3P@C
3P@C Installation Manual
Page 7-8 Reproduction and communication in any form prohibited without the written permission of SAGEM SA
Figure 7-2 hoosing the file to be sent
Figure 7-3 File transfer interface
Step 6: Return to the main menu
After the file is transferred successfully, the above interface disappears. The system returns to the serial port
menu (set the rate to 9,600 bps). Execute the command
x to return to the Bootrom main menu.
1.1.1.52 1.1.1.52 1.1.1.52 1.1.1.52 Upload/download the system file through FTP
3P@C 4450E can upload and download the system software through FTP.
The upload/download operation is implemented for the client. The download operation is to obtain the file of the
server side. The upload operation is to transfer the file of the client to the server side.
3P@C 4450E can sever as the server side or the client of the FTP.
„ If 3P@C 4450E serves as the server, you can transfer the system file to the equipment
through the command
upload ftp [config-file] <A.B.C.D> <username> <password>
<filename> in the client PC (containing the system file).
„ If 3P@C 4450E serves as the client, you can download the system file in the remote server
PC to the local equipment through the command download ftp [3P@COS|config-
file|xducode|vduos] <A.B.C.D> <username> <password> <filename> in the 3P@C 4450E
equipment.