Sagem 4450E - Manual (Page 121)

SAGEM 3P@C
3P@C Installation Manual
Page 7-6 Reproduction and communication in any form prohibited without the written permission of SAGEM SA
prompt
You must configure the terminal correctly.
Step 2: Start the equipment and enter the main menu of the Bootrom
Power on the equipment, and press <Space> repeatedly. If the “3P@C” prompt appears, it indicates
that you have accessed the Bootrom menu. The information of the menu is shown as follows:
3P@C 4450E Boot Loader V2.21
Compiled: Jan 3 2004 13:21:04
SDRAM test....passed.
Base ethernet MAC address: 00:05:3b:48:47:fd
? - List all available commands
h - List all available commands
g - Boot an executable image
dl - Enter download mode to load new image or config file
r - Reboot system
Press 'h' or '?' To get helping information.
3P@C:
For menu options and their meanings, see Figure 7-1.
prompt
You can upgrade the 3P@COS software in the Xmodem
mode. Alternatively, you can download new host program in
the FTP mode and save the program to Flash.
Step 3: Enter the download submenu
Select the No. dl option to enter the download mode as follows:
you enter download mode
? - List all available commands
h - List all available commands
n - Exchange load mode(default FTP)
p - Print boot parameters
c - Change boot parameters