Sagem 4450E - Manual (Page 157)

SAGEM 3P@C
3P@C Installation Manual
Page 11-4 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
Figure 11-2 Installation of fan support
Step 2
Installing the fan module: Plug the fan module into the fan support, and
fasten the captive screws on the both sides of the support after putting
the fan module in the corresponding position, as shown in the figure
below:
Figure 11-3 Installation of fan module
Captive screw
prompt
We suggest that you should not clean the fan shelf, and you
should replace the fan shelf when the fan shelf is damaged or
there is an alarm.