Siemens ADVANCE NETWORK COMMUNICATIONS BOARD/DATANET 2000592-001 - Manual (Page 42)

Assigning an IP Address
Overview Each DataNET device must have a unique IP address. This 32-bit
number defines each devices network ID and host ID. The IP address
must be assigned by the user before the unit is network operational.
See Setting Network Address page 30, for instructions on how to enter
the IP address.
IP Address The IP Address consists of a 32-bit number divided into four 8-bit fields.
Each field is expressed as a decimal number from 1 to 255 with each
field separated by periods. This is referred to as “dotted decimal”
notation. For example, 192.16.9.52 is an IP address.
How to Assign an IP
Address Ask your network administrator to assign you an IP Address, or if the
device will be in a closed plant area and not connected to the Internet
you can select an address from Table 2-1.
192.165.0.1
192.165.0.2
192.165.0.3
192.165.0.4
192.165.0.5
192.165.0.6
192.165.0.7
192.165.0.8
192.165.0.9
192.165.0.10
192.165.0.11
192.165.0.12
192.165.0.13
192.165.0.14 192.165.0.15
192.165.0.16
192.165.0.17
192.165.0.18
192.165.0.19
192.165.0.254
192.165.1.254
192.165.2.254
192.165.3.1 - 192.165.3.254 Table 2-1: Available IP
Addresses
32
• Data Communications Setup
2000592-001