Samsung DSR-1/1P - Manual (Page 21)

Chapter 2 Fitting and Connecting Related Equipment
Chapter 2 Fitting and Connecting Related Equipment
21
Inserting and Replacing the Lithium Battery
Chapter 2 Fitting and Connecting Related Equipment
1
Turn the POWER switch on.
2
Press down the catch at the top
of the battery cover and open
the cover.
3
Take out the lithium battery.
The DSR-1/1P uses a lithium battery to retain stored data. When using the
DSR-1/1P for the first time, be sure to insert the supplied lithium
battery (CR2032). The DSR-1/1P will not operate correctly without this
lithium battery.
Lifetime of the lithium battery
When the lithium battery’s voltage falls, the lithium backup battery
warning
Li appears in the display window. If this warning appears, replace
the lithium battery (CR2032) within three or four days.
The lithium battery has an average service life of about two years, however
operation in ClipLink mode will shorten the lifetime until about one year.
Inserting or replacing the lithium battery
Notes
• Carefully read the instructions for inserting and replacing the lithium
battery. Lithium batteries may explode if misused.
• Use only CR2032 Lithium Batteries. Other types of lithium batteries may
come loose when the camcorder is moved. If you have difficulty finding
CR2032 Lithium Batteries, contact your Sony dealer.
1
POWER switch
Catch
(Continued)
LI
LITHIUM BATT
Battery cover
2
Press and pull forward.
Press down and pull out toward you.