Samsung DSR-1/1P - Manual (Page 29)

Chapter 2 Fitting and Connecting Related Equipment
Chapter 2 Fitting and Connecting Related Equipment
29
Connecting Audio System
The DSR-1/1P is able to record sound not only from the microphone
attached to the camera but also from a wireless microphone or an external
audio system.
Using a Wireless Microphone System
When using the wireless microphone system including a WRT-810A/830A
UHF Wireless Microphone and a WRR-810A/855A/860A UHF Portable
Tuner to record sound, connect the tuner as described below. (The
procedure below is for connecting the WRR-855A using the BTA-801
Portable Tuner Mount Adapter.)
For details on using the wireless microphone system, see the operating
instructions for the microphone and tuner.
2
1
1
Attach the WRR tuner fitting
(not supplied) (Part No. A-
8278-057-A) to the rear of the
DSR-1/1P as shown in the
figure.
1 Pass a screwdriver through
the holes and tighten the
screws.
2 Loosen the adjustment
screws.
3 Adjust the metal fitting
position for a battery pack
to be attached, and tighten
the adjustment screws to fix
its position.
4 Attach the holder kit (two
fittings and four screws,
supplied with the tuner) to
the WRR tuner fitting (one
for the upper position and
the other for the lower
position).
2
Mount the tuner on the WRR
tuner fitting, then tighten the
screw at the bottom of the
BTA-801.
For details about the WRR tuner
fitting (Part No. A-8278-057-A),
contact your Sony dealer.
WRR-855A
(with BTA-801)
Attachment plate
(Continued)
Press the knob and turn it 90˚
in a clockwise manner to
secure.