Samsung DSR-1/1P - Manual (Page 63)

Chapter 6 Menu
Chapter 6 Menu
63
Menu 101 Setting the Real Time
Clock and Calendar
1
Display menu 101 and press the SHIFT button.
The current calendar setting appears in the setting
mode format (yyyymmdd).
Example: October 8, 1996
Note
The first two digits of the year setting cannot be
changed.
2
Use the SHIFT and ADVANCE buttons to set the
desired date.
If there are no more new settings to be made, go
directly to step
5 .
3
Press the SHIFT button while the data display is
blinking (Example: 19961008).
The current time (real time clock) setting is
displayed.
Example: 8:15:05 PM
4
Use the SHIFT and ADVANCE buttons to set the
current time.
5
Press the RESET/(MENU SET) button.
This starts the clock advance operation.
6
Press the MENU button.
This returns the display window to the display
shown before the VTR menu.
The date set can be displayed in the time value
indication (see page 49) in the following way.
19961008
Blinking
221505
Blinking
On the DSR-1: Displayed in mmddyyyy format
(Example: 10081996)
On the DSR-1P: Displayed in ddmmyyyy format
(Example: 08101996)
Menu 201 Checking the Total
Operating (Power-On) Hours
1
Display menu 201 and press the SHIFT button.
Pressing the SHIFT button cycles through the
following display items.
2
Check the indication, then press the RESET/
(MENU SET) button, followed by the MENU
button.
This returns the display window to the display
shown before the VTR menu.
Menu 204 Selecting Frame Mode
(DF/NDF) for Time Code (for
DSR-1 Only)
Select frame modes when setting the time code.
Drop-frame mode (factory setting): When adjusting
the discrepancy between time code value and real
time
Non-drop-frame mode: When you need not adjust the
discrepancy between time code value and real time
For details of time code settings, see page 51.
Indication Example
Head drum operating hours A 0429Hr
Tape transport hours b 0720Hr
Total operating hours C 0853Hr
Menu number 201 0492
(Continued)