Samsung DSR-1/1P - Manual (Page 69)

Chapter 6 Menu
Chapter 6 Menu
69
Menu 220 Using Setup Add (for
DSR-1 Only)
Use this menu to add setup to the playback video
signals.
For details on the setup add or setup remove, see “How to
use the setup add/setup remove” on the right.
1
Display menu 220.
The setup add is factory-set to oFF.
If the setting does not need to be changed, press
the MENU button to close the menu.
2
Press the SHIFT button to make the setup add on/
oFF indication start blinking, then press the
ADVANCE button to change the setting to on.
3
Press the RESET/(MENU SET) button and then
the MENU button.
The settings are recorded and display window
returns to the display shown before the VTR menu.
Menu 221
Using Setup Remove
(for DSR-1 Only)
Use this menu to remove the setup that was added to
the video signals at recording.
For details on the setup add or setup remove, see “How to
use the setup add/setup remove” on the right.
1
Display menu 221.
The setup remove is factory-set to on.
If the setting does not need to be changed, press
the MENU button to close the menu.
2
Press the SHIFT button to make the setup remove
on/oFF indication start blinking, then press the
ADVANCE button to change the setting to oFF.
3
Press the RESET/(MENU SET) button and then
the MENU button.
The settings are recorded and display window
returns to the display shown before the VTR menu.
How to use the setup add/setup remove
Use the setup add/setup remove as shown below
according to your shooting conditions.
For menu operations related to the setup add/setup remove,
see “Using Setup Add — Menu 220” or “Using Setup
Remove — Menu 221” on the left.
When using a camera signal with setup
Set the setup remove to on.
During recording, the signal of the image being shot
contains setup when it is output from the DSR-1/1P’s
S VIDEO OUT and VIDEO OUT connector. During
playback, the setup is removed from the output video
signal.
To have the setup added during playback, set the setup
add to on.
When using a camera signal without setup
Set both the setup add and setup remove to off.
Blinking
220 oFF
Setup add on/oFF indication
221 on
Blinking
Setup remove
on/oFF indication