SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 130)

C
ONFIGURING THE
S
WITCH
3-80
Configuring 802.1x Global Settings
The 802.1x protocol must be enabled globally for the switch system before
port settings are active.
Web – Click Security, 802.1x, Configuration. Check the Enabled box and
click Apply to enable 802.1x globally for the switch.
Figure 3-35 802.1x System Authentication Control
CLI – This example enables 802.1x globally for the switch and shows the
current setting.
Console(config)#dot1x system-auth-control 4-113
Console(config)#
Console#show dot1x
4-119
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status Operation Mode Mode
Authorized
1/1 disabled Single-Host ForceAuthorized n/a
1/2 disabled Single-Host ForceAuthorized n/a
.
.
.
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is disabled on port 26
.
.
.
Console#