SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 137)

U
SER
A
UTHENTICATION
3-87
Web – Click Security, IP Filter. Enter the addresses that are allowed
management access to an interface, and click Add IP Filtering Entry.
Figure 3-38 IP Filter
CLI – This example restricts management access for Telnet and SNMP
clients.
Console(config)#management telnet-client 192.168.1.19 4-39
Console(config)#management telnet-client 192.168.1.25
192.168.1.30
Console(config)#management snmp-client 10.1.2.3
255.255.255.255 4-39
Console(config)#end
Console#sh management telnet-client
4-40
Management IP Filter
TELNET-Client:
Start IP address End IP address
-----------------------------------------------
1. 192.168.1.19 192.168.1.19
2. 192.168.1.25 192.168.1.30
Console#sh management snmp-client
4-40
Management IP Filter
SNMP-Client:
Start IP address End IP address
-----------------------------------------------
1. 10.1.2.3 255.255.255.255
Console#