SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 380)

C
OMMAND
L
INE
I
NTERFACE
4-118
Example
dot1x timeout tx-period
This command sets the time that a port on the switch waits during an
authentication session before re-transmitting an EAP packet. Use the no
form to reset to the default value.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
seconds - The number of seconds. (Range: 1-65535)
Default
30 seconds
Command Mode
Interface Configuration
Example
Console(config)#interface ethernet 1/5
Console(config-if)#dot1x timeout re-authperiod 300
Console(config-if)#
Console(config)#interface ethernet 1/5
Console(config-if)#dot1x timeout tx-period 300
Console(config-if)#