SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 94)

C
ONFIGURING THE
S
WITCH
3-44
• Hours (0-12) – The number of hours before/after UTC.
• Minutes (0-59) – The number of minutes before/after UTC.
• Direction – Configures the time zone to be before (west) or after
(east) UTC.
Web – Select SNTP, Clock Time Zone. Set the offset for your time zone
relative to the UTC, and click Apply.
Figure 3-20 Setting the Time Zone
CLI - This example shows how to set the time zone for the system clock.
Configuring SNMP
Simple Network Management Protocol (SNMP) is a communication
protocol designed specifically for managing devices on a network.
Equipment commonly managed with SNMP includes switches, routers
and host computers. SNMP is typically used to configure these devices for
proper operation in a network environment, as well as to monitor them to
evaluate performance or detect potential problems.
Console(config)#clock timezone Pacific hours 8 minute 0 before-UTC4-71
Console#