SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 473)

S
PANNING
T
REE
C
OMMANDS
4-211
spanning-tree
Use this command to enable the Spanning Tree Algorithm globally for the
switch. Use the no form to disable it.
Syntax
[no] spanning-tree
Default Setting
Spanning tree is enabled.
Command Mode
Global Configuration
spanning-tree
spanning-disabled Disables spanning tree for an interface IC 4-218
spanning-tree cost Configures the spanning tree path cost of
an interface IC 4-218
spanning-tree
port-priority Configures the spanning tree priority of an
interface IC 4-220
spanning-tree edge-port Enables fast forwarding for edge ports IC 4-221
spanning-tree portfast Sets an interface to fast forwarding IC 4-222
spanning-tree link-type Configures the link type for RSTP IC 4-223
spanning-tree
protocol-migration Re-checks the appropriate BPDU format PE 4-224
show spanning-tree Shows spanning tree configuration for the
overall bridge or a selected interface PE 4-225
Table 4-53 Spanning Tree Commands
Command Function Mode Page