SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 426)

C
OMMAND
L
INE
I
NTERFACE
4-164
Example
snmp-server
This command enables the SNMPv3 engine and services for all management
clients (i.e., versions 1, 2c, 3). Use the no form to disable the server.
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console#show snmp
SNMP traps:
Authentication: enable
Link-up-down: enable
SNMP communities:
1. private, and the privilege is read-write
2. public, and the privilege is read-only
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors
0 No such name errors
0 Bad values errors
0 General errors
0 Response PDUs
0 Trap PDUs
SNMP logging: disabled
Console#
Console(config)#snmp-server
Console(config)#