SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 321)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-59
logging on
This command controls logging of error messages, sending debug or error
messages to switch memory. The no form disables the logging process.
Syntax
[no] logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory.
You can use the logging history command to control the type of error
messages that are stored.
Example
logging host Adds a syslog server host IP address that will
receive logging messages GC 4-61
logging facility Sets the facility type for remote logging of syslog
messages GC 4-62
logging trap Limits syslog messages saved to a remote server
based on severity GC 4-62
clear logging Clears messages from the logging buffer PE 4-63
show logging Displays the state of logging PE 4-64
Console(config)#logging on
Console(config)#
Table 4-17 Event Logging Commands
Command Function Mode Page