SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 195)

A
DDRESS
T
ABLE
S
ETTINGS
3-145
CLI – This example also displays the address table entries for port 11.
Changing the Aging Time
You can change the aging time for entries in the dynamic address table.
Command Attributes
• Aging Status – Enables or disables the aging time.
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-1000000 seconds; Default: 300 seconds)
Web – Click Address Table, Address Aging. Specify the new aging time,
click Apply.
Figure 3-65 Address Aging Time
CLI – This example sets the aging time to 300 seconds.
Console#show mac-address-table ethernet 1/11 4-208
Interface Mac Address Vlan Type
--------- ----------------- ---- -----------------
Eth 1/11 00-10-b5-62-03-74 1 Learned
Console#
Console(config)#mac-address-table aging-time 300 4-209
Console(config)#
Console#
Console#show mac-address-table aging-time
4-209
Aging time: 300 sec.
Console#