Sherwood R-771 User Manual
Page 23
ENGLISH
• Ensure that the SPEAKER button is set to off.
• Depending on the signal format which is being
input, you can listen in different Dolby
Headphone modes, stereo mode, etc. (For
details, refer to "Listening in a Dolby Headphone
mode" on page 26).
• When the EXTERNAL IN is selected as an input
source, only front left and front right channel
signals can be reproduced through the
headphones.
22
Select the digital or analog input
connected as desired.
4
• When playing back the program sources with
surround sound, refer to "ENJOYING
SURROUND SOUND" on page 25.
Notes :
• WhenTUNER, AUX, TAPE, EXTERNAL IN or VIDEO 4 is selected as an input source, the analog input
is selected automatically.
• When the selected digital input is not connected, the "DIGITAL" indicator filckers and the analog input is
automatically selected.
• The selected digital or analog input is automatically assigned to the corresponding input source on the
INPUT SETUP menu. (For details, refer to "SETTING THE INPUT SETUP" on page 40.)
• The sound from the component connected to the selected digital input can be heard regardless of the
selected input source.
Adjust the (overall) volume.
6
Operate the selected component for
playback.
5
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL
• Each time this button is pressed, the
corresponding input is selected as follows ;
A(nalog)
o(ptical) 1
o(ptical) 2
c(oaxial) 2
c(oaxial) 1
Muting the sound
Listening with headphones
When CD, VIDEO 1~3 is selected as an input source
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL
• "MUTE" will flicker.
• To resume the previous sound level, press it again.