Sherwood R-771 User Manual
Page 30
ENGLISH
LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the band
changes as follows ;
FM STereo
FM MONO
AM MONO
("ST" lights up) ("ST" goes off)
• When FM stereo broadcasts are poor because of
weak broadcast signals, select the FM mono
mode to reduce the noise, then FM broadcasts
are reproduced in monaural sound.
• When pressing the FM/AM button without
selecting the tuner, the tuner will be selected
automatically.
• The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and "TUNED".
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• Manual tuning is useful when you already know the frequency of the desired station.
• After selecting the tuner and the desired band, press the TUNING UP(+) / DOWN(-) buttons repeatedly until
the right frequency has been reached.
Manual tuning
Select the tuner.
1
Select the desired band.
2
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL
29
Press the TUNING UP(+)/DOWN(-) for more than 0.5 second.
3
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL