Sherwood R-771 - Manual (Page 29)

ENGLISH
28
Memorizing the adjusted channel levels
• The "1" of "REF 1" indication flickers for several
seconds.
After performing the steps ~ in "Adjusting the current channel level" procedure on page 27,
press the (MEMORY/) ENTER button.
1
Select the desired one of REF 1 and
REF 2.
2
Confirm your selection.
3
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the
memorized whenever you want.
• The adjusted channel levels have now been
memorized into the selected memory.
Press the CHANNEL LEVEL button.
1
Select the desired one of REF 1 and
REF 2.
2
Recalling the memorized channel levels
• "REF 1" (or "CAL") is displayed for several
seconds.
• If the channel level mode display disappears,
press this button again.
• Then the channel levels memorized into the
selected preset memory are recalled.
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL
• If the preset memory disappears, perform the
above step again.