Sherwood R-771 - Manual (Page 43)

ENGLISH
42
When selecting the NAME
• You can give names to the input sources other than tuner.
• Up to 8 characters can be entered for each name.
Press the CURSOR UP( )/DOWN( ) buttons to select the desired input source, then
press the ENTER button.
1
Example) When selecting the VIDEO 1
Press the CURSOR UP( )/DOWN( ) buttons to select the NAME, then press the ENTER button.
2
• The name is stored in the memory.
To resume its factory input source name.
• Make a blank on each digit and press the ENTER
button.
• The first digit flickers.
Press the CURSOR LEFT( )/ RIGHT( )
buttons to select the desired digit.
3
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL
• Then the selected digit will flicker.
Press the CURSOR UP( )/DOWN( )
buttons to enter the desired character on
the flickering digit.
4
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL
• You can enter the desired among blank, A ~ Z and
0 ~ 9.
Repeat the above steps and to enter the desired characters on the rest of the digits.
5
Confirm your entry.
6