Sherwood R-771 User Manual
Page 32
ENGLISH
31
RECORDING
Start recording on the TAPE.
2
Select the desired input as a recording
source except for TAPE.
1
Recording with TAPE
Select the desired of VIDEO 2 ~ 4 as a
recording source except VIDEO 1.
1
Dubbing from video components onto
VIDEO 1
Select VIDEO 2 as a video recording
source.
1
Dubbing the audio and video signals
separately onto VIDEO 1
Start play on the desired input.
3
Select CD as an audio recording
source.
2
Start recording on the VIDEO 1.
2
Start play on the desired input.
3
• The audio and video signals from the desired
input will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and from the
speakers.
Example) When dubbing the VIDEO 2 video signal and
the CD audio signal separately onto VIDEO 1.
• The analog signals from the EXTERNAL INs as well as the digital signals from the coaxial or optical digital input can be heard
but cannot be recorded.
• When recording the analog signals from CD, VIDEO 1~3, be sure to select the analog input.
(For details, refer to "When CD, VIDEO 1~3 is selected as an input source" on page 22.)
• The volume and tone (bass, treble) settings have no effect on the recording signals.
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL
ENTER
ENTER
CH.LEVEL
CH.LEVEL
CHANNEL
CHANNEL
• To record the analog signals onto the recording
equipment connected to TAPE, be sure to
connect the ROOM 2/TAPE OUT jacks to the
recording equipment and to assign the output to
TAPE REC. (For details, refer to "CONNECTING
AUDIO COMPONENTS" on page 8 and "When
selecting the OUT ASSIGN" on page 37.)