Sherwood R-771 - Manual (Page 46)

ENGLISH
45
Continued
To check the results, press the ENTER button.
6
• Then the results are memorized and the
SPEAKER/ROOM EQ SETUP menu is displayed.
• Check the results on each setup menu(SPEKER
CONFIGURATION menu on page 45, SPEAKER
DISTANCE menu on page 47, SPEAKER X-OVER
menu on page 48 and CH LEVEL menu for
"CALIBRATE" mode on page 50).
• If the results are not satisfactory, you can retry the
auto setup procedure or personalize your speaker
setup and channel level setup by making the
settings manually. (For details, refer to "When
selecting the SPEAKER CONFIGURATION" on
page 45, "When selecting the SPEAKER
DISTANCE" on page 47, "When selecting the
SPEAKER X-OVER" on page 48, "Adjusting each
channel level with test tone" on page 26 and
"Adjusting the current channel level" on page 27.)
Press the CURSOR UP( )/DOWN( ) buttons to select the SPEAKER CONFIGURATION,
then press the ENTER button.
1
When selecting the SPEAKER CONFIGURATION
Press the CURSOR UP( )/DOWN( ) buttons to select the desired speaker.
2
ENTER ENTER
CH.LEVEL CH.LEVEL
CHANNEL CHANNEL