When you have more than one sony dvd player – Sony DVP NC555ES User Manual
Page 17
D:\##sagyou\#05 May\824163S
DVPNC555ES_US\3082036112
DVPNC555ES_US\01US05HOO-U2.fm
master page=right
DVP-NC555ES
3-082-036-11(2)
17
Ho
oku
p
s
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
When you have more than one Sony DVD player
If the supplied remote interferes with your other Sony DVD player, set the command mode for
this player and the supplied remote to one that differs from the other Sony DVD player.
The default command mode setting for this player and the supplied remote is DVD 1.
1
Slide the COMMAND MODE switch on the remote to select the command mode (DVD
1, DVD 2, or DVD 3) so that the setting for the remote differs from the other DVD
players.
For example, if other DVD players respond to the default command mode setting for the
supplied remote (DVD 1), set the remote to DVD 2 or DVD 3.
2
Slide the COMMAND MODE switch on the rear of the player so it matches that of the
supplied remote.
SELECTABLE
INTERLACE
PROGRESSIVE
SCAN SELECT
COMPONENT VIDEO OUT
PR
PB
Y
S VIDEO
OUT
2
1
VIDEO
OUT
2
1
AC IN
5.1CH OUTPUT
FRONT
REAR
WOOFER
CENTER
L
R
1
2
3
COMMAND
MODE
L
R
AUDIO OUT
1
2
S-LINK
CONTROL S
IN
DIGITAL OUT
PCM/ DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
1
2
3
COMMAND
MODE
c
continued