Sony DVP NC555ES - Manual (Page 56)

D:\##sagyou\#05 May\824163S
DVPNC555ES_US\3082036112
DVPNC555ES_US\01US09SOU-U2.fm master page=left
DVP-NC555ES
3-082-036-11(2)
56
SURROUND Mode
Settings
You can enjoy surround sound while playing
discs recorded in the Dolby Surround (Pro
Logic) format.
This function is available when you connect 4
or more speakers and set “REAR” in “SIZE”
of “SPEAKER SETUP” to any setting other
than “NONE.”
1
Press DISPLAY during playback.
The Control Menu is displayed.
2
Press X/x to select
(SURROUND), then press ENTER.
The options for “SURROUND” appear.
3
Press X/x to select one of the
surround modes, then press
ENTER.
• NORMAL SURROUND
Discs with 2 channel audio signals are
decoded with the Dolby Surround (Pro
Logic) decoder to create surround effects.
The rear speakers will emit identical
monaural sounds. If you are using a
center speaker, the appropriate sounds for
the center speaker will be delivered.
• ENHANCED SURROUND
Provides a greater sense of presence from
a Dolby Surround (Pro Logic) source
with a monaural rear channel signal.
Produces a stereo like effect in the rear
channels.
To cancel the setting
Select “OFF” in step 3.
Notes
• If you use the DIGITAL OUT (OPTICAL or
COAXIAL) jack and set “DOLBY DIGITAL” to
“DOLBY DIGITAL” and “DTS” to “DTS” in
“AUDIO SETUP”, sound will come from your
speakers but it will not have the surround effect.
• If the player is set up to output the signal from the
DIGITAL OUT (OPTICAL or COAXIAL) jack,
the surround effect will not be heard when you
play a CD.
DISPLAY
ENTER
X / x
DVD VIDEO
OFF
NORMAL SURROUND
ENHANCED SURROUND
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
1
T 1 : 3 2 : 5 5
PLAY
L: Front speaker (left)
R: Front speaker (right)
LS: Rear speaker (left)
RS: Rear speaker (right)
L R
RS LS