Sony DVP NC555ES - Manual (Page 19)

D:\##sagyou\#05 May\824163S
DVPNC555ES_US\3082036112
DVPNC555ES_US\01US05HOO-U2.fm master page=right
DVP-NC555ES
3-082-036-11(2)
19
Ho
oku
p
s
A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 22). (Do this if you are
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, P
B
, P
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images. If your TV accepts progressive
(480p) format signals, you must use this connection and set “COMPONENT OUT” to
“PROGRESSIVE” in “SCREEN SETUP” (page 72).
When connecting to a wide screen TV
Depending on the disc, the image of some discs may not fit your TV screen. If you want to
change the aspect ratio, please refer to page 71.
z Hint
If your TV has an S-LINK (CONTROL S) jack, you can control the player by operating the remote toward
the TV. This feature is convenient when you placed the player and the TV away from each other. After
connecting the player with other components according to the above A, B, or C, connect the TV via the
S-LINK/CONTROL S IN jack using an S-link (control S) cord (not supplied). Refer to the instructions
supplied with the TV to be connected.
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
Green
Blue
Red
Green
Blue
Red
c continued