Step 4: connecting the audio cords, Select a connection – Sony DVP NC555ES User Manual
Page 21
D:\##sagyou\#05 May\824163S
DVPNC555ES_US\3082036112
DVPNC555ES_US\01US05HOO-U2.fm
master page=right
DVP-NC555ES
3-082-036-11(2)
21
Ho
oku
p
s
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
z
Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Surround” are
registered trademarks of Digital Theater
Systems, Inc.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects: None
Stereo amplifier (receiver) and two speakers
• Surround effects: None
or
MD deck/DAT deck
• Surround effects: None
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 82)
– DTS (5.1 ch) (page 82)
– Super Audio CD Multi channel (page 84)
or
AV amplifier (receiver) with digital input jacks
having a Dolby or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 82)
– DTS (5.1ch) (page 82)
A
D
A
B
C
D
D
c
continued