Sony DVP NC555ES - Manual (Page 24)

D:\##sagyou\#05 May\824163S
DVPNC555ES_US\3082036112
DVPNC555ES_US\01US05HOO-U2.fm master page=left
DVP-NC555ES
3-082-036-11(2)
24
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use .
z Hint
For correct speaker location, refer to the operating
instructions of the amplifier (receiver).
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a center speaker, 2
rear speakers and a subwoofer.
• Super Audio CD audio signals are not output from
the digital jack.
C
C-1
C-2
SELECTABLE
INTERLACE PROGRESSIVE
SCAN SELECT
COMPONENT VIDEO OUT
PR PB Y
S VIDEO OUT
2
1
VIDEO OUT
2
1
AC IN
5.1CH OUTPUT
FRONT REAR WOOFER
CENTER
L
R
1 2 3
COMMAND
MODE
L
R
AUDIO OUT
1 2
S-LINK
CONTROL S
IN
DIGITAL OUT
PCM/ DTS/DOLBY DIGITAL
COAXIAL OPTICAL
C-2 C-1
L
R
AUDIO OUT
1 2
DIGITAL OUT
PCM/ DTS/DOLBY DIGITAL
COAXIAL OPTICAL
CD/DVD player
or
Front (R) Front (L) Rear (R)
Subwoofer
l : Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Center Rear (mono)
Stereo
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(red) (white)
to coaxial or optical digital
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)
to AUDIO OUT L/R 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)