Sony DVP NC555ES - Manual (Page 30)

D:\##sagyou\#05 May\824163S
DVPNC555ES_US\3082036112
DVPNC555ES_US\01US05HOO-U2.fm master page=left
DVP-NC555ES
3-082-036-11(2)
30
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 23 to
25 (
through ). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 69 for using the Setup Display.
Audio Connection (pages 22 to 25)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 75).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 75).
• Set “DIGITAL OUT” to “ON” (page 75).
• Set “DISTANCE,” “LEVEL (FRONT),”
and “LEVEL (REAR)” according to the
connected speakers (page 77).
z Hints
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON” (page
74).
• For connections
Set “48kHz/96kHz PCM” to “96kHZ/24bit” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page
76).
• The speaker size you set in steps 16 through 20
will also adjust the Super Audio CD speaker size
of “SPEAKER SETUP.” If you want to change
the speaker size for Super Audio CDs, you can set
it in “SPEAKER SETUP” (page 76).
B D
A
B-1 C-1
B-2 C-2 D-2
D-1
B-1 C-1 D-1
B-2 C-2 D-2