Sony DVP NC555ES - Manual (Page 67)

D:\##sagyou\#05 May\824163S
DVPNC555ES_US\3082036112
DVPNC555ES_US\01US11USI-U2.fm master page=right
DVP-NC555ES
3-082-036-11(2)
67
U
si
ng Var
iou
s Add
iti
o
nal
F
unc
tion
s
Controlling Your TV or AV
Amplifier (Receiver) With
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player to an AV amplifier
(receiver), you can control the volume with
the supplied remote.
Notes
• Depending on the connected unit, you may not be
able to correctly control your TV or AV amplifier
(receiver) using some of the buttons below.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
Controlling TVs with the remote
1
Slide the TV/DVD switch to TV.
2
Hold down [/1, and enter your TV’s
manufacturer code (see “Code
numbers of controllable TV’s” below)
using the number buttons.
3
Release [/1.
When the TV/DVD switch is set to TV, the
remote performs the following:
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
[ /1
VOL +/–
TV/VIDEO
Number
buttons
TV/DVD
switch
ENTER
[/1 Turns the TV on or off
VOL +/– Adjusts the volume of the TV
TV/VIDEO Switches the TV’s input
source between the TV and
other input sources
The button works even if the
TV/DVD switch is set to
DVD
Number buttons
and ENTER Selects the channel of the TV
Manufacturer Code number
Sony 01 (default)
Akai 04
AOC 04
Centurion 12
Coronado 03
Curtis-Mathes 12
Daytron 12
Emerson 03, 04, 14
Fisher 11
General Electric 06, 10
Gold Star 03, 04, 17
Hitachi 02, 03
J.C.Penney 04, 12
JVC 09
KMC 03
Magnavox 03, 08, 12
Marantz 04, 13
MGA/Mitsubishi 04, 12, 13, 17
NEC 04, 12
Panasonic 06, 19
Philco 03, 04
Philips 08, 21
Pioneer 16
c continued