Sony STR-DA777ES - Manual (Page 17)

17
Hooking Up and Setting Up the Speaker System
Once you have hooked up the speakers and turned on the
power, clear the receiver’s memory. Then specify the
speaker parameters (size, position, etc.) and perform any
other initial setup operations necessary for your system.
Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see “@∞
SPEAKERS selector” on page 27).
Clearing the receiver’s memory
Before using your receiver for the first time, or when you
want to clear the receiver’s memory, do the following.
1
Press CUSTOM.
CUSTOMIZE menu appears in the display.
2
Press the cursor buttons ( or ) repeatedly to
display “MEMORY CLEAR [NO]”.
3
Turn the jog dial to display “MEMORY CLEAR
[YES]” and press ENTER.
“Are you sure? [NO]” is displayed.
4 Turn the jog dial to display “Are you sure? [YES]”
and press ENTER.
The unit automatically turns off, and then turns on
again. All of the followings are reset to the factory
settings or cleared.
• All menu adjustments (speaker settings, equalizer
settings, sound field parameters, etc.).
• The equalizer settings in the equalizer bank.
PHONES
SPEAKERS
A OFF A + B B
MEMORY – + – + A.F.D FM / AM TUNER PRESET
0 10
MULTI CHANNEL DECODING
OPEN/
CLOSE
MASTER VOLUME
1 9
8
7
2
3
6
5
4
AUDIO SPLIT DIGITAL / ANALOG
1 / u
+
ENTER
EQ SUR LEVEL
TUNER CUSTOM SET UP
VIDEO S-VIDEO L AUDIO R
1/u
–
2 CH ANALOG DIRECT EQ BANK 5.1CH INPUT SOUND FIELD PRESET SOUND FIELD
INPUT SELECTOR
– + MODE
CUSTOM
ENTER
Performing Initial Setup Operations
Performing initial setup operations
Before using your receiver for the first time, use the SET
UP button to adjust the setup parameters so that they
correspond to your system. You can adjust the following
items. For details on how to make adjustments, see the
page in parenthesis.
• Speaker size and placement (pages 18~19).
• Speaker distance (page 20).
Cursor buttons
Jog dial