Sony STR-DA777ES - Manual (Page 50)

50
Receiving Br
oadcasts
Preset Tuning
For details on the buttons used in this section, see “Brief
descriptions of buttons used to receive broadcasts” on
page 49.
Before tuning to preset stations, be sure to preset them by
performing steps on “Presetting radio stations” below.
Presetting radio stations
1
Turn INPUT SELECTOR to select TUNER.
The last received station is tuned in.
2 Tune in the station that you want to preset using
Automatic/Manual Tuning (page 49) or Direct
Tuning using the remote (page 51).
3 Press MEMORY.
“MEMORY” appears in the display for a few seconds.
Do Steps 4 and 5 before “MEMORY” goes out.
4 Press TUNER PRESET + or – to select a preset
number.
5
Press MEMORY again to store the station.
If “MEMORY” goes out before you can store the
station, start again from Step 3.
6
Repeat Steps 2 to 5 to preset another station.
To change a preset number to another station
Do Steps 1 to 5 to preset the new station to the number.
Clearing preset stations
1
Press TUNER to activate the tuner menu.
2 Press the cursor buttons ( or ) to display
“PRESET CLEAR [NO]”.
3
Turn the jog dial to display “PRESET CLEAR [YES]”
and press ENTER.
“Are you sure? [No]” is displayed.
4
Once again, turn the jog dial to display “[YES]” and
press ENTER.
Tuning to preset stations
You can tune the preset stations either of the following
two ways.
Scanning the preset stations
1
Turn INPUT SELECTOR to select TUNER.
The last received station is tuned in.
2
Press TUNER PRESET + or TUNER PRESET –
repeatedly to select the preset station you want.
Each time you press the button, the receiver tunes in
one preset station at a time, in the corresponding order
and direction as follows:
nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N
nC0˜...C2˜C1N