Sony STR-DA777ES - Manual (Page 47)

47
Settings and Adjustments
p Sound Field Link
S.FIELD LINK [OFF]
Initial setting : OFF
When set to [ON], the sound field that was last applied to
a program source is automatically applied whenever it is
selected. For example, if you listen to CD with STADIUM
as the sound field, change to a different program source,
then return to CD, STADIUM will be applied again. If you
do not want to use this function, set to [OFF].
p CONTROL A1 auto function
AUTO FUNCTION [ON]
Initial setting : ON
Lets you set whether the CONTROL A1 auto function
can turn Sony components connected via CONTROL A1
cord (see page 12) on or off and control their functions as
if in a system or not. Select [OFF] when you do not want
system control of the other components.
p Setting up the 2 way remote
2-way REMOTE [ON]
Initial setting : ON
If you want to use this receiver together with another
component that is also compatible with the 2 way remote
control system, be sure to perform the following operation
to limit response to signals sent from the remote controls.
• To use with the TA-E9000ES, turn OFF this unit’s 2 way
remote control system. Make sure the TA-E9000ES is
turned on when using this unit.
• To use with other components that have the logo,
turn OFF the other component’s 2 way remote control
system. For details, refer to the operating instructions
suppled with your other components.
• To use with Sony CD players CDP-CX260 or
CDP-CX88ES, turn OFF the remote control adapter
switch on the CDP-CX260 or CDP-CX88ES. For details,
refer to the operating instructions suppled with the
CDP-CX260 or CDP-CX88ES.
• When using several 2 way remote control system
components together, be sure to place them close
together in order to enable proper remote operation.
p Naming Program sources
XXXXXXXX [ ]
Lets you register a name of up to 8 characters for the
currently selected function. Touch
or to move the
position and turn the jog dial to select a character. When
you are finished entering the name, press ENTER.
When you want to clear a name that has been registered,
touch
or to make the 8 character boxes blink. Turn
the jog dial one click to the right to make the name appear
as 8 spaces and then press ENTER.
z
You can easily enter the names of components manufactured
by Sony
When or is touched to make the 8 character boxes blink...
• First, turn the jog dial one click to the right to display the name
as 8 spaces. If ENTER is pressed at this time, the name is
cleared.
•If you continue turning the jog dial to the right, the model
names of components manufactured by Sony appear. Press
ENTER to confirm a new name. If you want to make changes to
the name, touch
until the character you want to change
blink and turn the jog dial to change the character.
p Memory clear
MEMORY CLEAR [NO]
Initial setting : NO
To clear the memory, select [YES] and press ENTER. “Are
you sure?” is displayed. Select [YES] and press ENTER
again. The unit automatically turns off, and then turns on
again. The memory is cleared.
p Sleep timer
SLEEP X:XX:XX
Initial setting : OFF
Lets you set the receiver to turn off automatically after a
certain time. Simply select how long you would like to
wait before the unit turns itself off. Countdown begins
automatically. The timer can be adjusted in 30 minute
steps up to 9 hours using the receiver and up to 2 hours
using the remote.
To cancel the sleep function, select [OFF] before the count
down is complete.