Sherwood R-865 - Manual (Page 16)

ENGLISH
16
Universal Remote Controls
This universal remote control can operate not only this receiver but also most popular brands of audio and video components
such as CD players, tape decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc.
• To operate 7 components other than this receiver, you should enter the setup code for each component.
(For details, refer to “USING FUNCTIONS OF REMOTE CONTROL” on page 19.)
• The numbered buttons on the remote control have different functions in different device modes.
For details, refer to “FUNCTION TABLE of the NUMBERED BUTTONS” on the next page.
POWER ON button
SLEEP button
TEST TONE button
CHANNEL SELECTOR button
DOLBY PL II MUSIC PARAMETER button
DISPLAY button
DECODING MODE button
SURROUND A/B button
DIGITAL/ANALOG button
NUMERIC(0~9, +10, +100) /
INPUT SELECTOR buttons
To select the desired input source
of TUNER~8 CH DIRECT IN.
To operate a macro function,
press the corresponding
MACRO button.
PRESET TUNING UP/DOWN(+/-) buttons
DEVICE buttons
To operate the desired component with
this remote control, first select the
corresponding DEVICE button.
LCD SCREEN
MUTE button
ROOM 2 button
DIMMER button
STANDBY button
OSD button
RETURN button
PRESET SCAN button
TUNING UP/DOWN(+/-) buttons
STEREO button
PURE AUDIO button
CURSOR CONTROL( , , , )/
ENTER buttons
VOLUME UP/DOWN( / ) buttons CHANNEL/ADJUST UP/DOWN( / ) buttons
DSP MODE UP/DOWN( / ) buttons
SURROUND BACK button
MACRO(M1~M3) buttons
LIGHT button
Activates the backlighting of the remote
control for about 20 seconds. If only other
button is pressed while the backlighting is on,
the remote control will remain backlight for
an additional period.
DECODING MODE buttons