Connecting digital ins and out, Connecting 8ch direct ins, English – Sherwood R-865 User Manual

Page 8

Advertising
background image

ENGLISH

8

4. CONNECTING DIGITAL INs and OUT

• The OPTICAL and the COAXIAL DIGITAL OUTs of the

components that are connected to CD, AUX and VIDEO
1~ VIDEO 4 of this unit can be connected to these
DIGITAL INs.

• A digital input should be connected to the components

such as a CD player, LD player, DVD player, etc. capable
of outputting DTS Digital Surround, Dolby Digital or PCM
format digital signals, etc.

• If the component with OPTICAL IN jack is connected to

the OPTICAL OUT jack of this unit, you can record the
high quality sound of CDs, etc. without degradation.

• For details, refer to the operating instructions of the

component connected.

• When making the COAXIAL DIGITAL connection, be sure

to use a 75

Ω COAXIAL cord, not a conventional AUDIO

cord.

• All of the commercially available optical fiber cords cannot

be used for the equipment. If there is an optical fiber cord
which cannot be connected to your equipment, consult
your dealer or nearest service organization.

Note :

• Be sure to make either a OPTICAL or a COAXIAL

DIGITAL connection on each component. (You don’t need
to do both.)

Digital input default settings

• If you connect the DIGITAL INs to your components, it is easier to do so following the default settings.
• If your DIGITAL connections are different from default settings, you should assign the DIGITAL INs you used with the “When

selecting the DIGITAL INPUT SETUP” procedure on page 55.

• The default settings are as follows :

OPTICAL IN 1 : VIDEO 1, OPTICAL IN 2 : VIDEO 2, COAXIAL IN 1 : CD, COAXIAL IN 2 : VIDEO 3, (Front) OPTICAL IN 3 :
VIDEO 4

5. CONNECTING 8CH DIRECT INs

• Use these jacks to connect the corresponding analog

audio and video outputs of a DVD player or a external
decoder, etc. that has 6, 7 or 8 channel audio and video
outputs.

• In case of 6 or 7 channel outputs, do not connect both of

the SURROUND BACK L and R inputs or the
SURROUND BACK R input to this unit.(For details, refer
to the operating instructions of the component to be
connected.)

Component with
OPTICAL DIGITAL OUT

Component with
OPTICAL DIGITAL OUT

Component such as an
MD recorder, CD recorder
with OPTICAL DIGITAL IN

Component with
COAXIAL DIGITAL OUT

Component with
COAXIAL DIGITAL OUT

CENTER

SUBWOOFER

FRONT

R L

SURROUND

R L

SURR.BACK

R L

(COMPOSITE)

VIDEO OUT

S-VIDEO

OUT

Decoder with 6, 7 or 8 channel outputs

8 CH DIRECT OUTs

Advertising