Sherwood R-865 - Manual (Page 44)

ENGLISH
44
OTHER FUNCTIONS
• This function compresses the dynamic range of
previously specified parts of the Dolby Digital sound
track(with extremely high volume)to minimize the
difference in volume between the specified and non-
specified parts.
This makes it easy to hear all of the sound track when
watching movies at night at low levels.
• “DYNAMIC : ~” is displayed for several seconds.
• If the dynamic range mode disappears, start again
from the above step .
• Each time the MULTI CONTROL knob is rotated,
the compression rate changes as follows:
• In some Dolby Digital software, this function may
not be available.
Compressing the dynamic range
(Dolby Digital sources only)
• The sleep timer allows the system to continue to
operate for a specified period of time before
automatically shutting off.
• To set the receiver to automatically turn off after the
specified period of time.
• Each time this button is pressed, the sleep time
changes and disappears in several seconds as follows:
10 20 30 60 90 OFF
Unit : minutes
• While operating the sleep timer, “ ” lights up.
• Each time this button is pressed, the brightness of all
fluorescent displays of Sherwood components
connected by the DIGI LINK III changes together as
follows:
ON dim OFF
• In the display OFF mode, pressing any button will
restore the display ON mode.
Operating the sleep timer Adjusting the brightness of the
fluorescent displays
Adjust the dynamic range as desired.
2
While the digital signals from the Dolby
Digital program source are being input.
1
• When the sleep time is selected, all display panels of
Sherwood components connected by the DIGI LINK
III are dimly lit.