Sherwood R-865 User Manual
Page 67
ENGLISH
67
• Each time these buttons are pressed, the ROOM 2
FEED mode is changed to “On” or “Off”.
• When the ROOM 2 FEED mode is set to “Off”, the
ROOM 2 source cannot be selected.
• When you do not use the ROOM 2 function, set the
ROOM 2 FEED mode to Off to save electricity.
Press the CURSOR UP(
)/DOWN(
)
buttons to select the ROOM 2 FEED
mode.
1
Press the CURSOR LEFT(
)/RIGHT(
)
buttons to select the ROOM 2 FEED
mode as desired.
2
• Each time the CURSOR CONTROL buttons are
pressed, “+” is moved to the corresponding input
source.
• When the audio and video input sources are both
marked with “+” , you can enjoy the sound of the
audio input source and the image of the video input
source separately.
Press the CURSOR UP(
)/DOWN(
)/LEFT(
)/RIGHT(
) buttons to select the desired ROOM 2
source, then press the ENTER button.
3
When selecting the ROOM 2 FEED mode
When the ROOM 2 FEED mode is set to On