Samsung SNB-3000(P) - Manual (Page 25)

English _
●
CA
me
RA
Se
TU
p
moTIoN
You can specify a level of AGC for controlling the
camera motion.
Select F.FAST if you want to monitor a very fast
moving object in a low contrast scene, and S.SLOW
if monitoring a very slow moving, inanimate object in
the same condition.
As long as DAY/NIGHT is set to AUTO, the
<moTIoN> menu is not available.
dNR
Reduces the noise on the screen.
This is useful, especially for a noisy screen.
Set it to <USeR>, you can specify the level.
ShUTTeR
The SHUTTER menu is used to set the fixed fast
electronic shutter or auto fast electronic shutter.
SeNS-Up
If the brightness of the video signal is too low, the Slow Shutter function will be activated.
Slow Shutter can collect the individual max frame rate to adjust the setting.
FLICkeRLeSS
If set to <oN>, the shutter speed will be fixed to 1/100 second. This will prevent possible
screen distortion due to a mismatch between the vertical sync frequency and the blinking
frequency of the lighting.
If IRIS is set to ELC / SHUTTER to AUTO, FIX, EXT mode / SENSE UP to FIX / AGC to FIX, the <DIS> menu
will be disabled.
XdR
This will correct a brightness difference between different scenes for the optimal visibility.
The higher the value is, the higher the correction level is.
dIS
Automatically compensates for the flicker on the screen.
If set to <oN>, the image will be enlarged with digital zoom as much area as
compensated.

◄ CAMERA SET ►
CAMERA ID ON
IRIS ALC
MOTION (F.FAST)---
DNR MID
SHUTTER OFF
SENS-UP AUTO X4
FLICKERLESS OFF
XDR MID
DIS OFF
DAY/NIGHT AUTO
WHITE BAL
DIGITAL ZOOM OFF
DETAIL [2]
AGC COLOR SUP MID
REVERSE OFF
POSI/NEGA +
PIP OFF