Samsung SNB-3000(P) - Manual (Page 50)

0_ setup screen
ACCeSSING The SeTUp SCReeN
You can configure the default setting, system, overlay, event and network related settings, and
change them as necessary.
In the Live screen, click the <Setup>
tab.
The Setup screen appears.
deFAULT SeTUp
To configure the video & audio
settings
You can set the video resolution, quality,
CODEC and audio input/output settings.
Select <Basic> - <video & Audio>.
The Video & Audio setup screen appears.
Brightness : Adjust the screen
brightness from 1 to 100.
Contrast : Adjust the contrast from
1 to 100.
Resolution : Set the video size of the
MPEG4, H.264, and MPEG files.
NTSC : 4CIF(704x480),
VGA(640X480), CIF(352X240)
PAL : 4CIF(704x576),
VGA(640X480), CIF(352X288)
Quality : Adjust the picture quality
from 1 to 10.
Frame rate : Select one from 30 fps,
15 fps, 8 fps, 3 fps, and 1 fps.
Bitrate control* : Select CBR (Constant
Bit Rate) or VBR (Variable Bit Rate) for
the compression method.
If selecting VBR, you can not set the target
bit rate.
1.
2.
1.



-
-




setup screen