Setup screen, Network setup – Samsung SNB-3000(P) User Manual

Page 66

Advertising
background image

setup screen

_ setup screen

NeTWoRk SeTUp

To set the video transfer mode

You can control the transfer rate according to the video transfer mode and network speed.

Select <Network> - <Streaming type>.

The Video Transfer setup window

appears.
When done, click [Apply].

Your settings will be saved.

vNp streaming : You can set the

Samsung Protocol (VNP) for the streaming service.

Protocol : Select a video transfer protocol from TCP*, UDP (Unicast)*, and UDP

(Multicast)*.

Speaking to the camera unit through microphone is not supported.
Multicast backbone (MBone) is not supported; you can access the camera only in the

multicast local network environment.

RTp streaming : You can set the RTP Protocol or the streaming service.

Protocol : Select a video transfer protocol from UDP (Unicast) and UDP (Multicast).

To set the ddNS

DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address

of a camera into a general Host Name so that the user can easily remember it and enables

connecting a camera with a fixed Host Name even if the IP address of the camera may be

dynamically changed.

Select <Network> - <ddNS>.

The DDNS setup window appears.
When done, click [Apply].

Your settings will be saved.

For checking the DDNS address, refer to "To check the DDNS address". (page 43)

1.

2.

-


-

1.

2.

M

Advertising