Samsung SNB-3000(P) - Manual (Page 58)

setup screen
_ setup screen
To access the camera using HTTPS mode, you have to type the IP address for the camera in the
form of “https://<Camera_IP>”.
When done, click [Apply].
The web viewer will switch to the set secure connection system.
To Set Ip Filtering
Click <System> - <Ip filtering>.
The IP Filtering Setup screen appears.
Basic policy : You can select the IP
filtering policy.
If you set to Permission, the web
server allows all attempting IP
addresses except the addresses
added in the refusal list.
If you set to Refusal, the web server allows only IP addresses added in the
permitted list and rejects all other IP addresses.
To apply the IP filtering policy, click [Apply] button.
Enter the IP address and subnet mask into the IP field to be allowed or rejected.
The Filtering range* will differ depending on specified IP address and subnet mask.
oveRLAy SeTUp
You can display text on the screen.
To set the text
Select <overlay> - <overlay text>.
The Overlay Text setup window
appears.
When done, click [Apply].
Your settings will be saved.
Overlay text settings : If you select
<disable>, the overlay text will not
be displayed; If selecting <enable>, it will display on the screen.
Show date : Set to display the date information on the bottom screen.
Output Format : Select a display format of the date information.
YYYY-MM-DD : Year-Month- Day / MM-DD-YYYY : Month-Day-Year /
DD-MM-YYYY : Day-Month-Year
M 
2.
1.

2.
1.
2.


-