Sony HDW-M2100 - Manual (Page 24)

Chapter 2
Location and Function of Parts
2-16
Chapter 2 Location and Function of Parts
TIME CODE
OUT
TIME CODE OUT connector
7 Time code output section
TIME CODE OUT connector (XLR 3-pin, male)
This outputs the playback time code.
By setting setup menu item 606, you can also output
the time code from the internal time code generator
locked to the playback time code.
8 Audio monitor signal output section
1 MONITOR OUTPUT R connector (XLR 3-pin,
male)
This outputs the audio signals whose output
destination was set to ‘R’ with the audio signal
selection buttons in the audio control section. If
multiple tracks have been set to ‘R’, the signals of
those tracks are mixed for output.
2 MONITOR OUTPUT L connector (XLR 3-pin,
male)
This outputs the audio signals whose output
destination was set to ‘L’ with the audio signal
selection buttons in the audio control section. If
multiple tracks have been set to ‘L’, the signals of
those tracks are mixed for output.
MONITOR OUTPUT
R L
1 MONITOR OUTPUT R
connector
2 MONITOR OUTPUT L
connector
2-2 Connector Panel