3-2 preroll and cue up using clip data – Sony HDW-M2100 User Manual

Page 55

Advertising
background image

6-6

Chapter 6 Tele-File

Chapter 6

Tele-File

Moving the cursor directly

Regardless of the cursor’s current position, pressing
one of the following buttons moves the cursor directly
to the specified position in the same clip and displays
the data.

IN (video IN point) button: IN point data
OUT (video OUT point) button: OUT point data
MARK button: Cue point data

To display the duration
Press the IN (video IN point) and OUT (video OUT
point) buttons simultaneously. The cursor moves to the
IN point data of the same clip, and the duration
appears while the buttons are held down. If there is no
IN point or OUT point data, the duration is displayed
as 0:00:00:00.

6-3-2 Preroll and Cue Up Using
Clip Data

In clip data display mode, you can use clip data to
preroll and cue up.

To preroll to the cue point, IN point, or
OUT point

1

Select a clip.

2

Select the cue point, the IN point, or the OUT
point.

3

Press the PREROLL button.

The unit exits from the Tele-File menu and prerolls
to the position of the selected data.
The preroll time is according to the setting of setup
menu item 001.

Note

The unit does not preroll if there is no data for the
selected point.

To cue up the cue point, IN point, or OUT
point

1

Select a clip.

2

Press the PREROLL button while holding down
the IN (video IN point), OUT (video OUT point),
or MARK button.

The unit exits from the Tele-File menu and cues up
the position of the data selected in step 2 (the cue
point position if the MARK button was pressed).

Note

The unit does not preroll if there is no data for the
selected point.

6-3 Tele-File Menu

Advertising
This manual is related to the following products: