4 items in the extended setup menu – Sony HDW-M2100 User Manual

Page 90

Advertising
background image

Chapter 9

Setup Menus

9-20

Chapter 9 Setup Menus

9-4 Items in the Extended Setup Menu

Menu items in the range 700 to 799, relating to video control (Continued)

Item number

Item name

Settings

709

CAV LEVEL FORMAT
(Valid only in 59.94i or
29.97PsF mode.)

Select whether the analog component output should be D-1 or Betacam.

Format

Color bars

Y video

Y sync

R–Y/B–Y

D-1 CAV

100/0/100/0

700 mV

300 mV

700 mV

Betacam

100/7.5/77/7.5 714 mV

286 mV

700 mV

712

VIDEO PROCESS ON
CAP LOCK 2FIELD
(Invalid in 24PsF or
23.98PsF mode.)

When the function menu item CAPSTN or setup menu item 106 is set to 2F for 2-
field playback, select whether or not to carry out a “picture shift”.

OFF : No picture shift

ON: Carry out picture shift.

Note

To eliminate the adverse effect of the residual chrominance subcarrier component
in the Y signal that is the result of the Y/C separation, this unit automatically
applies a shift to the playback image in the H direction, so that even in 2-field
playback a satisfactory image can be obtained.

713

VIDEO SETUP
REFERENCE LEVEL
(Valid only in 59.94i,
29.97PsF mode.)

Set the video setup amounts to be removed from a Betacam playback signal and
to be added to a composite output signal. There are independent settings for a
Betacam signal and a composite output signal (referred to below as the output
signal).

Note

The setup amounts specified in this menu item have no connection with the
function menu item SETUP/BLACK.

Sub-item

Sub-item

OUTPUT CAV
LEVEL

0

Select the analog component output format.

B-CAM : Betacam

D1: D-1

710

INTERNAL VIDEO
SIGNAL GENERATOR

Select the test signal to be output from the VTR’s internal test signal generator.
OFF : No test signal is generated.
CB : Color bar signal
MLTBS: Multi-burst signal
10STP: 10-step signal
PLSBR: Pulse and bar signal
RAMP: Ramp signal
BLACK: Black signal

0

When the Betacam playback signal and output signal settings are “MSTER”
(master), the setup amount specified for this sub-item is removed from the
Betacam playback signal and is added to the output signal.
0.0% to 7.5% to 10.0%: Setting in this range, in 0.5% increments.

MASTER LEVEL

1

MSTER : Set the Betacam playback signal to the master setting.

0.0% to 7.5% to 10.0%: Set the setup amount to be removed from the Betacam

playback signal in this range, in 0.5% increments.

BETACAM PB
LEVEL

MSTER : Set the output signal to the master setting.

0.0% to 7.5% to 10.0%: Set the setup amount to be added to the output signal in

this range, in 0.5% increments.

2

OUTPUT LEVEL

(Continued)

Advertising
This manual is related to the following products: