Sony HDW-M2100 - Manual (Page 94)

Chapter 9
Setup Menus
9-24
Chapter 9 Setup Menus
9-4 Items in the Extended Setup Menu
Menu items in the range 800 to 899, relating to audio control (Continued)
Menu items in the range 900 to 999, relating to digital processing
824 ANALOG LINE OUTPUT
SELECT Select the analog audio signals (tracks 1 to 8) to be assigned to audio output
channels 1 to 4.
Item number Item name Settings
Sub-item
1 CH1/CH2 tr1/2 : Tracks 1 and 2 assigned to audio output channels 1 and 2
tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2
tr5/6: Tracks 5 and 6 assigned to audio output channels 1 and 2
tr7/8: Tracks 7 and 8 assigned to audio output channels 1 and 2
2 CH3/CH4 tr1/2: Tracks 1 and 2 assigned to audio output channels 3 and 4
tr3/4 : Tracks 3 and 4 assigned to audio output channels 3 and 4
tr5/6: Tracks 5 and 6 assigned to audio output channels 3 and 4
tr7/8: Tracks 7 and 8 assigned to audio output channels 3 and 4
825 AUDIO ADVANCE MODE Set the audio output phase.
OFF : Same as the video output phase
ON: One frame ahead of the video output phase
826 AUDIO PB VOLUME
SELECT Selects which PB control knobs are assigned to control playback of digital audio
channels.
The settings for CH5 to CH8 are valid only for the HDW-M2100.
1 CH1
2 CH2
3 CH3
4 CH4
5 CH5
6 CH6
7 CH7
8 CH8
Sub-item
0 ALL CH DEFAULT : Use the following settings.
CH1: Control knob 1
CH2: Control knob 2
CH3: Control knob 3
CH4: Control knob 4
CH5: Unity
CH6: Unity
CH7: Unity
CH8: Unity
UNITY: Set all channels to unity, and disable the control knobs.
MENU: Use the following menu settings.
UNITY: Set playback level to unity.
vol 1: Assign playback level control to control knob 1.
vol 2: Assign playback level control to control knob 2
vol 3: Assign playback level control to control knob 3.
vol 4: Assign playback level control to control knob 4.
Item number Item name Settings
901 VIDEO OUTPUT DATA
(Invalid in 24PsF or
23.98PsF mode.)
Set the bit length for SD video output data.
8bit: Set the bit length to 8 bits.
10bit : Set the bit length to 10 bits.
It is recommended that you select the optimal setting for the device to which you
are going to connect this unit.
(Continued)