Sony HDW-M2100 - Manual (Page 84)

Chapter 9
Setup Menus
9-14
Chapter 9 Setup Menus
9-4 Items in the Extended Setup Menu
Menu items in the range 300 to 399, relating to editing operations
Item number Item name Settings
301 VAR SPEED RANGE FOR
SYNCHRONIZATION Select the playback speed range when carrying out playback in variable speed
mode from a remote control unit connected to the REMOTE-1 IN(9P) connector
or REMOTE-1 OUT (9P) connector.
–1~+2 : –1 to +2 times normal speed for HDCAM and Betacam SX tapes. –1 to
+3 times normal speed for Digital Betacam, MPEG IMX, and analog tapes.
~2.45 : –1.5 to +2.45 times normal speed for HDCAM and Betacam SX tapes.
–1.5 to +3.45 times normal speed for Digital Betacam, MPEG IMX, and analog
tapes.
302 CAPSTAN RE-LOCKING
DIRECTION
(Invalid in 24PsF or
23.98PsF mode.) In 59.94i, 29.97PsF mode
When the function menu item CAPSTN is set to 4F, select whether the capstan
servo should lock by accelerating or decelerating.
DECEL : Lock by decelerating.
ACCEL: Lock by accelerating.
In 50i, 25PsF mode
When the function menu item CAPSTN is set to 4F or 8F, select whether the
capstan servo should lock by accelerating or decelerating.
DECEL: Lock by decelerating.
ACCEL : Lock by accelerating.
307 AUTO-DELETION FOR
INCONSISTENT DATA Select what happens when an erroneous edit point is set.
MANU : A warning is given by flashing the DELETE button on the lower control
panel.
The operator must manually delete the unnecessary edit points or correct the
erroneous edit point.
NEG&E: When inconsistent edit points are set, such as when an OUT point is
before an IN point, or an audio OUT point is before an audio IN point, or when
too many edit points are specified, the previously set edit point is deleted.
NEG: When inconsistent edit points are set, such as when an OUT point is before
an IN point, or an audio OUT point is before an audio IN point, the previously
set edit point is deleted. When more edit points than necessary are specified,
the DELETE button on the control panel flashes to give a warning.
Note
Pressing the button corresponding to an edit point to be deleted and the DELETE
button simultaneously deletes the edit point. If an erroneous edit point is set (the
DELETE button is flashing), editing is not executed.
306 DMC INITIAL SPEED Select the initial speed automatically set when carrying out DMC playback.
Note
If you want to carry out DMC playback after setting this menu item, first press the
DMC EDIT and DELETE buttons simultaneously to turn off the DMC EDIT button.
MANU : The speed determined by the rotation of the search dial
PLAY: Normal playback speed
STILL: Stationary
±0.03 to ±1, +2: Speed set in the range ±0.03 to +2 (select from +2, ±1, ±0.5,
±0.2, ±0.1, ±0.03)
320 DIGITAL AUDIO PB
PROCESS ON EDIT
POINT
(Invalid in 24PsF or
23.98PsF mode.) Select the treatment of audio playback at edit points.
CUT : Carry out cut editing (possibly resulting in audio discontinuities at the edit
point).
FADE: Fade out and fade in.
(Continued)