Sony HDW-M2100 - Manual (Page 72)

Chapter 9
Setup Menus
9-2
Chapter 9 Setup Menus
To display setup menus
With the function menu HOME page showing in the
menu display, press the F5 (MENU) button.
The currently selected setup menu item is displayed in
the menu display, with the menu item number flashing.
For basic operations in the menu display, see page 2-5.
9-2 Setup Menu Operations
MULTI
CONTROL
HOME
CHANNEL
CONDITION
F1 F2 F3 F4 F5 F6
RESET
PUSH/
SHIFT
ALARM
KEY INHI
CTL/TC
TC MENU
59.94
HOME button F5 (MENU) button
Function menu HOME page
SELECT SET EXIT
SET
UP
H01 : OPE HOURS O
59.94
To display menus on the monitor
Setting F4 (CHARA) to ON in function menu page 4
allows you to display setup menus on the monitor
connected to the COMPOSITE VIDEO OUTPUT
3(SUPER) connector, HDSDI OUTPUT 3(SUPER)
connector or SDI OUTPUT 3(SUPER) connector of
this unit. When a setup menu appears on the monitor, a
cursor indicates the currently selected menu item.
Displaying a desired menu item
When the menu item number displayed in the menu
display is flashing, you can change the menu item by
turning the MULTI CONTROL knob.
To skip from one item group to the next, press the v
button or V button.
Group name for the
currently selected item
Cursor indicating
the currently
selected item
MULTI
CONTROL
HOME
CHANNEL
CONDITION
F1 F2 F3 F4 F5 F6
RESET
ALARM
KEY INHI
SET
UP
001:P–ROLL
SELECT SET EXIT
5S TIME –
PUSH/
SHIFT
59.94
MULTI
CONTROL knob v and V buttons
Setup menu item H01 displayed
SHIFT indicator