Sony MZ-N10 - Manual (Page 18)

18
Getting started
1
Slide BUILT-IN BATTERY to ON.
The protection for the built-in lithium-ion rechargeable battery is released, power is
supplied to the recorder and recharging of the built-in rechargeable battery becomes
enabled.
When operating the recorder using the AC power adaptor or a dry battery
The recorder normally needs to be supplied power from the built-in rechargeable battery. Make sure to
do the following when using the recorder.
—Keep BUILT-IN BATTERY set to ON no matter what power source you use.
—Charge the built-in rechargeable battery before it is fully drained.
2
Charging the rechargeable battery.
1 Connect the AC power adaptor to the
USB cradle and the AC adaptor to a wall
outlet. 2 Place the recorder on the USB cradle.
Press the recorder onto the USB cradle.
Keep the switch to ON position. If,
however, the recorder will not be used
for 3 months or more, set the switch to
OFF to prevent degradation of the
battery.
Rear of the
recorder
AC power
adaptor
To DC IN 6V
To a wall
outlet USB cradle